Power Point Installation Geelong
New, extra and replacement power points for homes across Geelong, the Bellarine and the Surf Coast, by CabledIN
Power point installation in Geelong by CabledIN Electrical Solutions covers new, double, USB and outdoor weatherproof power points in homes, fitted and tested by licensed electricians who give you a Certificate of Electrical Safety.
We are based in North Geelong (REC 30925) and work in homes across greater Geelong, the Bellarine Peninsula, the Surf Coast, Golden Plains and Werribee. We price the job once we have seen it, so you know the price before any work starts. Replacing an existing power point is a short job. A new one on a long cable run takes longer.
- Our most common power point job
- Double power points, new and replacement
- Who can do it
- Licensed electricians only. DIY electrical work is illegal in Victoria
- Paperwork
- Certificate of Electrical Safety for the work
- Who does it
- CabledIN, REC 30925
Power point services we carry out
- New and extra power points. Kitchens, home offices, bedrooms, garages and sheds.
- Single to double. Swapping a single outlet for a double is the upgrade we are asked for most.
- Replacement. Cracked, loose, scorched or dead outlets replaced with new ones.
- USB and USB-C power points. Charging ports built into the outlet, useful beside beds, desks and kitchen benches.
- Outdoor weatherproof power points. Single and twin outlets built for outdoor use, for decks, patios, carports and gardens.
- 15 amp and larger outlets. For appliances and equipment that need more than a standard 10 amp point, on their own circuit.
- Relocations. Moving outlets during a kitchen or bathroom update, or lifting one behind a wall-mounted television.
- Dedicated circuits. A new circuit from the switchboard for a heavy appliance.
Signs a power point needs replacing
Energy Safe Victoria lists old or broken switches and power points, and sparks from power points, among the signs that home wiring may be faulty. Have a power point looked at if:
- it is warm, discoloured or has scorch marks
- it buzzes, crackles or sparks when you plug something in
- plugs sit loose or fall out
- the plate is cracked or the switch no longer clicks
- it works on and off, or not at all
- the safety switch trips when you use it
Stop using a power point that is hot, sparking or scorched, and switch it off at the wall if it is safe to do so. A faulty power point is one of the things that can make a safety switch trip. Our guide covers the others: why does my safety switch keep tripping?
Talk to a licensed Geelong electrician (REC 30925).
Where power points can and cannot go
An electrician can put a power point in most places you would want one, but a few positions are ruled out or need more care.
- Near a cooktop. Energy Safe Victoria states that no switch or socket may be within 150 mm of the edge of a cooking surface.
- Bathrooms and laundries. Outlets near water need more care about where they sit. We tell you what suits your room before any cable is run.
- Outdoors. We fit weatherproof outlets made for outdoor use, not indoor power points under a cover.
- Brick and double-brick walls. A flush outlet is not always practical. A neat surface-mounted outlet can be the better choice.
Tell us what you plan to plug in. A phone charger and a heater put very different loads on a circuit. Our guide goes through each of these positions in more detail: can an electrician install a power point anywhere?
Outdoor weatherproof power points
An outdoor power point should be a weatherproof outlet built for outdoor use, on a circuit protected by a safety switch. Since our job records began in March 2026, CabledIN has completed more than 25 jobs that included outdoor weatherproof power points, for decks, patios, carports, garden walls and outdoor kitchens.
- A weatherproof outlet, not an indoor one under a cover. We fit outlets made for outdoor use, with a cover that closes over the socket when nothing is plugged in.
- Safety switch protection. A safety switch (RCD) watches the current on a circuit and cuts the power when it detects a leak that could harm a person. Energy Safe Victoria says it does this within 0.03 of a second. Every outdoor outlet we fit is on a circuit protected by one, and we add one if the circuit has none.
- A sensible position. We agree the spot with you first: easy to reach, clear of where water pools, and away from where sprinklers and the hose spray.
USB and USB-C power points
A USB power point is a standard power point with charging ports built into the plate, so phones and tablets charge without a plug-in adaptor. CabledIN fits USB power points in homes around Geelong, including USB-C versions.
- USB-A, USB-C or both. USB-A is the older, rectangular port. USB-C is the smaller, oval port found on many newer phones, tablets and laptops. Many USB power points carry one of each, so check the cables your household uses.
- Swap or add. A USB power point can usually replace an existing double power point in the same spot, or go in as a new outlet.
- Still electrical installation work. A USB power point connects to the 240 volt wiring like any other outlet, so a licensed electrician must install it and you receive a Certificate of Electrical Safety.
Not sure what you need? Tell us what is happening and we will talk it through.
How power point installation works
- We look at the job. Where you want the outlets, where the nearest suitable circuit is, and how the cable can get there through the roof space, under the floor or inside the wall.
- We check the circuit and the board. Can the circuit take the extra load, and is it protected by a safety switch (RCD)?
- A price before we start. We price the job once we have seen it, so you know the price before any work starts.
- Power off, cable run, outlet fitted. We switch off the circuit, run the cable, cut in the outlet and connect it.
- Testing. The new outlet is tested, including polarity, earthing and safety switch operation.
- Certificate. You receive a Certificate of Electrical Safety. For this type of work your copy is due within 30 days.
We clean up before we leave.
Existing circuit or new circuit?
Most extra power points can be added to an existing power circuit. A new circuit is the right answer when the existing one is already loaded, or when the outlet is for something that draws a lot of power.
The warning signs of an overloaded circuit are double adaptors and power boards in every room, and a circuit breaker that trips when a few appliances run together. More outlets on that same circuit will not help. A new circuit will.
A new circuit needs a spare space in the switchboard. If yours is full, or still has ceramic fuses, we will talk to you about a switchboard upgrade. While we are at the board, it is also the easiest time to add surge protection for the equipment you are about to plug in.
Shed and garage wiring
Shed and garage wiring gives a shed, garage or workshop fixed power instead of a lead across the yard. Since March 2026 CabledIN has completed more than 55 jobs involving sheds, garages and other outbuildings, with outlets on a circuit protected by a safety switch and a sub-board where a workshop needs one. Our page on shed, garage and granny flat power in Geelong covers the cable route, sub-boards and what to plan for.
The Victorian rules for power point work
- No DIY, even like for like. Doing your own electrical work is illegal in Victoria. That includes replacing a power point with an identical one.
- A licensed electrician working for a registered contractor. In Victoria an electrician must work for a registered electrical contractor to do work for a customer. Ours is REC 30925, and you can check any contractor on Energy Safe Victoria's public register.
- A certificate every time. A Certificate of Electrical Safety must be provided for all electrical installation work, whatever the size of the job.
- No independent inspection needed. Power points are non-prescribed work, so an inspector does not need to attend.
Power point jobs around greater Geelong
Power points are the work we do most. Since our job records began in March 2026, CabledIN has completed more than 185 power point jobs across greater Geelong, most often in Lara, Corio, Leopold, Geelong West, Bannockburn and Hamlyn Heights. The double power point is the most common part we fit, kitchen bench outlets come next, and outdoor and garage power points are regular work too.
Many of these jobs are part of something bigger: a kitchen upgrade, a wall-mounted television, a home office, or an older home that was built with one outlet per room. Where a house needs outlets throughout and the wiring is old, we will tell you honestly whether house wiring or rewiring is the better path.
CabledIN Electrical Solutions is a family-owned Registered Electrical Contractor (REC 30925) based in North Geelong, with more than 20 years in the trade, a lifetime workmanship warranty, 2,000+ five-star Google reviews, and 24/7 emergency call-outs. We are open 24 hours, 7 days on 1300 025 555.
Recent power point jobs around Geelong
Indoor, outdoor and replacement power points fitted by our electricians.
What customers say
Efficient and timely service from Joey, who replaced a faulty powerpoint the same day I called. Friendly and approachable, great clear explanations and recommendation for further work to optimize safety, arranged quote. Work area left clean and tidy. Highly recommend! Thank you!
Susan, Google review
Frequently asked questions
Can I install or replace a power point myself?
No. Doing your own electrical work is illegal in Victoria, even swapping a power point for an identical one. A licensed electrician working for a registered electrical contractor must install it, test it and give you a Certificate of Electrical Safety. CabledIN does this work in homes across greater Geelong, the Bellarine Peninsula, the Surf Coast, Golden Plains and Werribee.
How long does power point installation in Geelong take?
Replacing an existing power point is a short job. A new power point takes longer, depending on how far the cable has to run and how easy the roof space, wall or underfloor is to get into. Our electricians tell you how long the work will take when they look at the job and price it, before any work starts.
Can an electrician install a power point anywhere?
Almost, but not everywhere. Energy Safe Victoria states that no switch or socket may be within 150 mm of the edge of a cooking surface, and outlets near water in bathrooms and laundries need extra care about where they sit. Outdoors, an electrician should fit a weatherproof outlet made for outdoor use. Tell the electrician what you plan to plug in and they will suggest the best spot.
Can a single power point be changed to a double?
Yes, in most cases. Changing a single power point to a double is one of the most common jobs CabledIN does in homes around greater Geelong, and the double usually fits in the same spot in the wall. We check the circuit can take the extra load first, then fit, test and certify the new outlet.
Can you install USB and USB-C power points?
Yes. A USB power point is a standard power point with charging ports built into the plate, and models come with USB-A ports, USB-C ports or one of each. It usually replaces an existing outlet and suits bedsides, desks and kitchen benches. It connects to the 240 volt wiring, so a licensed electrician must install it and you receive a Certificate of Electrical Safety.
Can I have a power point installed outside?
Yes. CabledIN fits weatherproof outlets made for outdoor use on decks, patios, carports, garden walls and sheds, on a circuit protected by a safety switch (RCD). Energy Safe Victoria says a safety switch cuts the power within 0.03 of a second when it detects a leak that could harm a person. We agree the position with you before any cable is run.
Can you add a power point behind a fridge or in the garage?
Yes. Extra power points in kitchens, garages and sheds are everyday jobs. We check whether the existing circuit can take the extra load or whether the new outlets need a circuit of their own.
Can you run a power point from a light switch?
It is not the way we would do it. Lighting circuits are designed for lighting loads, so a new power point should come from a power circuit or a new circuit run from the switchboard. That keeps the outlet on a circuit sized for what will be plugged into it, with the right protection at the board.
How many power points can go on one circuit?
There is no single number that suits every home. It depends on what will be plugged in and the rating of the cable and circuit breaker. We work that out before adding outlets.
What size cable is used for power points?
The electrician sizes the cable to suit the circuit breaker, the length of the run and the load. It is part of the design of the circuit, and not something to choose off the shelf.
Why has my power point stopped working?
Check whether a safety switch or circuit breaker has tripped at the switchboard. If it has not, or the outlet is warm, scorched or loose, stop using it and call a licensed electrician.
Do I get a certificate for a new power point?
Yes. A Certificate of Electrical Safety must be provided for all electrical installation work in Victoria, including a single new power point. Power points are non-prescribed work, so no independent inspection is needed, and your copy of the certificate is due within 30 days of the work being finished.
Still have a question? Ask the CabledIN team.